FALL 2020 DIGITAL LECTURE ASSIGNMENT 1

Fall 2020 Digital Lecture Assignment 1

My Tinkercad circuit: 

https://www.tinkercad.com/things/jqg6hZ0D9r7

My changes to the original circuit, are detailed below:

1. Added a white LED.
2. The white LED is only active when the button is pressed. 
3. Added 2 red LEDs that are active when the green and blue LEDs are.
4. Changed the pin assigned to the button from 10 to 5.
5. Changed the millisecond blink rate on the green, blue and red LEDs.